{"id":5668637048991,"title":"Cutting Fluid Test Kit","handle":"basic-cutting-fluid-test-kit","description":"\u003ch1 class=\"c-title c-title--primary\"\u003e\u003cspan\u003eFor the standard situation in water testing\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch2 class=\"c-stage-item__title\"\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures compliance to regional Health and Safety at Work Procedures\u003c\/li\u003e\n\u003cli\u003eOptimises cutting fluid performance\u003c\/li\u003e\n\u003cli\u003eSafely controls microbiological contamination\u003c\/li\u003e\n\u003cli\u003eOptimised for accurate trend analysis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"u-padding-bottom-large\"\u003e\n\u003ch3 class=\"u-text-appearance-h5 u-color-blue u-margin-bottom-tiny\"\u003eApplications\u003c\/h3\u003e\n\u003cul class=\"c-navigation-meta--delimiter c-navigation-meta__list\"\u003e\n\u003cli\u003e\n\u003cspan\u003e  Boiler Water\u003c\/span\u003e \u003c\/li\u003e\n\u003cli\u003e  Cooling Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e Drinking Water Treatment\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e Pool Water Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e Pool Water Treatment\u003c\/li\u003e\n\u003cli class=\"c-navigation-meta__item\"\u003e\n\u003cspan\u003e  \u003c\/span\u003eWaste Water Treatment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCutting fluids are required in metal machining to improve tool life, reduce work piece thermal deformation, enhance surface finish and to flush chips from the cutting zone. These fluids degrade with time due to bacterial growth and contamination with tramp oil.\u003c\/p\u003e\n\u003cp\u003eTesting is essential since health risks exist for lathe operators by both fluid contact (dermatitis) and breathing of the mist\/vapour (asthma, extrinsic allergic alveolitis and other breathing problems).\u003c\/p\u003e\n\u003cp\u003eBiocidal additives improve the life of the fluid and reduce the hazard to health. On-going monitoring, inspection and maintenance are required in the UK as part of an employer’s obligation under Section 2 of the Health and Safety at Work Act 1974. Similar work related mandates are in force across Europe.\u003c\/p\u003e\n\u003cp\u003eLovibond® test kits measure the key parameters necessary to optimise cutting fluid performance and enable enumeration and safe control of microbiological contamination. The basic kit is supplied with tests for cutting fluid concentration (refractometer), pH, water hardness, Nitrite\/Nitrate and dipslides for monitoring microbiological activity. A deluxe version, incorporating the DI 10 dipslide incubator is also available. A uniform incubation temperature for dipslides allows accurate microbiological trend analysis month on month.\u003c\/p\u003e\n\u003cp\u003eRANGE\u003c\/p\u003e\n\u003ctable height=\"186\" style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003e\u003cb\u003eTest parameter\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e\u003cb\u003eMeasuring Range\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003e\n\u003cp\u003eBrix\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e0 - 18 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003eDipslides\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003eHardness\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e0 - 500 mg\/l CaCO\u003csub\u003e3\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003eNitrate\/Nitrite\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e1 - 80 mg\/l NO\u003csub\u003e2\u003c\/sub\u003e\u003cspan\u003e \u003c\/span\u003e\u003csup\u003e-\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003e\n\u003cp\u003eNitrate\/Nitrite-Test Strips\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e10 - 500 mg\/l NO\u003csub\u003e3\u003c\/sub\u003e\u003cspan\u003e \u003c\/span\u003e\u003csup\u003e-\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003epH\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e0 - 14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","published_at":"2020-09-20T17:18:37+02:00","created_at":"2020-09-20T17:18:35+02:00","vendor":"Lovibond","type":"Industrial","tags":["Angola","Botswana","Cape Town","DRC","Durban","Ethiopia","Gauteng","Joburg","Johannesburg","Madagascar","Mozambique","Namibia","Pretoria","Tanzania","Uganda","Water cleaner","Water filter","Water purifier","Water tester","Zambia","Zimbabwe"],"price":0,"price_min":0,"price_max":0,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":37480640446623,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cutting Fluid Test Kit","public_title":null,"options":["Default Title"],"price":0,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0450\/0992\/8351\/products\/cutting_fluid_kit_mb2_01.jpg?v=1600615117"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0450\/0992\/8351\/products\/cutting_fluid_kit_mb2_01.jpg?v=1600615117","options":["Title"],"media":[{"alt":"Basic Cutting Fluid Test Kit","id":11321717981343,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1200,"width":1200,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0450\/0992\/8351\/products\/cutting_fluid_kit_mb2_01.jpg?v=1600615117"},"aspect_ratio":1.0,"height":1200,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0450\/0992\/8351\/products\/cutting_fluid_kit_mb2_01.jpg?v=1600615117","width":1200}],"content":"\u003ch1 class=\"c-title c-title--primary\"\u003e\u003cspan\u003eFor the standard situation in water testing\u003c\/span\u003e\u003c\/h1\u003e\n\u003ch2 class=\"c-stage-item__title\"\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnsures compliance to regional Health and Safety at Work Procedures\u003c\/li\u003e\n\u003cli\u003eOptimises cutting fluid performance\u003c\/li\u003e\n\u003cli\u003eSafely controls microbiological contamination\u003c\/li\u003e\n\u003cli\u003eOptimised for accurate trend analysis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"u-padding-bottom-large\"\u003e\n\u003ch3 class=\"u-text-appearance-h5 u-color-blue u-margin-bottom-tiny\"\u003eApplications\u003c\/h3\u003e\n\u003cul class=\"c-navigation-meta--delimiter c-navigation-meta__list\"\u003e\n\u003cli\u003e\n\u003cspan\u003e  Boiler Water\u003c\/span\u003e \u003c\/li\u003e\n\u003cli\u003e  Cooling Water\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e Drinking Water Treatment\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e Pool Water Control\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e \u003c\/span\u003e Pool Water Treatment\u003c\/li\u003e\n\u003cli class=\"c-navigation-meta__item\"\u003e\n\u003cspan\u003e  \u003c\/span\u003eWaste Water Treatment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCutting fluids are required in metal machining to improve tool life, reduce work piece thermal deformation, enhance surface finish and to flush chips from the cutting zone. These fluids degrade with time due to bacterial growth and contamination with tramp oil.\u003c\/p\u003e\n\u003cp\u003eTesting is essential since health risks exist for lathe operators by both fluid contact (dermatitis) and breathing of the mist\/vapour (asthma, extrinsic allergic alveolitis and other breathing problems).\u003c\/p\u003e\n\u003cp\u003eBiocidal additives improve the life of the fluid and reduce the hazard to health. On-going monitoring, inspection and maintenance are required in the UK as part of an employer’s obligation under Section 2 of the Health and Safety at Work Act 1974. Similar work related mandates are in force across Europe.\u003c\/p\u003e\n\u003cp\u003eLovibond® test kits measure the key parameters necessary to optimise cutting fluid performance and enable enumeration and safe control of microbiological contamination. The basic kit is supplied with tests for cutting fluid concentration (refractometer), pH, water hardness, Nitrite\/Nitrate and dipslides for monitoring microbiological activity. A deluxe version, incorporating the DI 10 dipslide incubator is also available. A uniform incubation temperature for dipslides allows accurate microbiological trend analysis month on month.\u003c\/p\u003e\n\u003cp\u003eRANGE\u003c\/p\u003e\n\u003ctable height=\"186\" style=\"width: 534px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003e\u003cb\u003eTest parameter\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e\u003cb\u003eMeasuring Range\u003c\/b\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003e\n\u003cp\u003eBrix\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e0 - 18 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003eDipslides\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003eHardness\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e0 - 500 mg\/l CaCO\u003csub\u003e3\u003c\/sub\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003eNitrate\/Nitrite\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e1 - 80 mg\/l NO\u003csub\u003e2\u003c\/sub\u003e\u003cspan\u003e \u003c\/span\u003e\u003csup\u003e-\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003e\n\u003cp\u003eNitrate\/Nitrite-Test Strips\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e10 - 500 mg\/l NO\u003csub\u003e3\u003c\/sub\u003e\u003cspan\u003e \u003c\/span\u003e\u003csup\u003e-\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 263px;\"\u003epH\u003c\/td\u003e\n\u003ctd style=\"width: 236px;\"\u003e0 - 14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e"}

Cutting Fluid Test Kit

Product Description

For the standard situation in water testing

Highlights

  • Ensures compliance to regional Health and Safety at Work Procedures
  • Optimises cutting fluid performance
  • Safely controls microbiological contamination
  • Optimised for accurate trend analysis

Applications

  •   Boiler Water 
  •   Cooling Water
  •   Drinking Water Treatment
  •   Pool Water Control
  •   Pool Water Treatment
  •   Waste Water Treatment

Cutting fluids are required in metal machining to improve tool life, reduce work piece thermal deformation, enhance surface finish and to flush chips from the cutting zone. These fluids degrade with time due to bacterial growth and contamination with tramp oil.

Testing is essential since health risks exist for lathe operators by both fluid contact (dermatitis) and breathing of the mist/vapour (asthma, extrinsic allergic alveolitis and other breathing problems).

Biocidal additives improve the life of the fluid and reduce the hazard to health. On-going monitoring, inspection and maintenance are required in the UK as part of an employer’s obligation under Section 2 of the Health and Safety at Work Act 1974. Similar work related mandates are in force across Europe.

Lovibond® test kits measure the key parameters necessary to optimise cutting fluid performance and enable enumeration and safe control of microbiological contamination. The basic kit is supplied with tests for cutting fluid concentration (refractometer), pH, water hardness, Nitrite/Nitrate and dipslides for monitoring microbiological activity. A deluxe version, incorporating the DI 10 dipslide incubator is also available. A uniform incubation temperature for dipslides allows accurate microbiological trend analysis month on month.

RANGE

Test parameter Measuring Range

Brix

0 - 18 %
Dipslides
Hardness 0 - 500 mg/l CaCO3
Nitrate/Nitrite 1 - 80 mg/l NO2 -

Nitrate/Nitrite-Test Strips

10 - 500 mg/l NO3 -
pH 0 - 14
Read more
Maximum quantity available reached.

Related products