MINIKITs are designed for rapid water testing. Most MINIKITS are based on titrimetric methods.
Used for testing boiler and cooler water in industry.
Tablet Count Method:
A specific number of tablets is added to a known volume of sample until a chemically induced colour change takes place. The number of tablets used is applied to a simple formula to calculate the test result. The measuring range may be expanded by varying the sample volume.
The speed test is based on reverse titration. After adding a reagent tablet to a calibrated test tube, the water sample is added slowly until the colour of the solution changes (e.g. from red to blue). The user can then obtain the result from the liquid level.
A Yes/No test tells the user whether a specific ingredient is present in the water and/or if its concentration is higher or lower than a defined level.
A two-section calibrated test tube is filled with the water sample and a reagent tablet added. The reagent creates a level of turbidity that is proportional to the concentration of the parameter being measured. The inner tube, which has a black dot on its base, is lowered until the dot is obscured by the turbidity. The result is read off from the water level in the inner tube.
- Easy operation and exact reagent dosing without any additional equipment
- Measurement accuracy even in difficult operating environments
- Unrestricted shipment and safe storage
- Each test contains sufficient reagents for an average 30 tests.