Conductivity Maintenance & Calibration Kits

Conductivity meters and cells should be calibrated to a standard solution before using. When selectin

Product Description

Conductivity meters and cells should be calibrated to a standard solution before using. When selecting a standard, choose one that has the approximate conductivity of the solution to be measured.

Cleaning Electrodes:

A polarized or fouled electrode must be cleaned to renew the active surface of the cell.

  • In most situations, the Electrode Cleaning Solution is an effective cleanser.
  • Acetone easily cleans most organic matter and Chlorine solutions will remove algae, bacteria or moulds.
  • To prevent cell damage, abrasives or sharp objects should not be used to clean an electrode.
  • A cotton bud works well for cleaning, but care must be taken not to widen the distance of the cell.

Kits available:

Kits are available in the following ranges: Low, Medium, High and Wide range.

They include three bottles of Conductivity Standards, Electrode cleaning solution, Electrode rinse water and four plastic calibration beakers.

Material Safety Data Sheets (MSDS) and COA sheets are available on request. Please request them if required.

Delivery Content:

  • 500 ml Conductivity Standard 12880 microSiemens / cm
  • 500 ml Conductivity Standard 5 000 microSiemens / cm
  • 500 ml Conductivity Standard 3 000 microSiemens / cm
  • 500 ml electrode cleaning solution
  • 500 ml electrode rinse water
  • 4 x plastic calibration beakers

All bottles supplied are plastic.

Material Safety Data Sheets (MSDS) and COA sheets are available on request. Please request them if required.

Additional Information

Weight 3.00 kg